(HELP) 3200 with Bluebox Fimware

[Bervzux]

Ello,

Sorry I cannot speak Rusian. Hope someone in this forum can help me with 3200.

Is there any bluebox firmware which can work in 3200 ?
My 3200 hardware version is B1 and Firmware version is v2.50.

I tried to flash my 3200 with v2_180, but tftp said error. Please see error below:


D-Link Access Point login: admin
Password:

Wireless Driver Rev 4.0.0.167
D-Link Access Point wlan1 -> tftp srvip 192.168.0.190

D-Link Access Point wlan1 -> tftp get v2_180.tfp
file name: v2_180.tfp

D-Link Access Point wlan1 -> tftp update
[Error] New Watch Dog Timer v2.0 can't load old code !!!

Fail to write file!


Please help me o solve this issue.
Thanks.

[FlasherDK]

HI! You can flash your 3200 with program FTP Programmer for AP39.
Here you can find this software.

This is direct link

http://acowa.narod.ru/FTP_Programmer....1.0_setup.exe

[Bervzux]

HI! You can flash your 3200 with program FTP Programmer for AP39.
Here you can find this software.

This is direct link

http://acowa.narod.ru/FTP_Programmer....1.0_setup.exe

Thanks for answer. Ok I got the FTP program. But where is firmware for 3200 ? Do you have latest firmware for 3200 ?

Thanks

[Bervzux]

HELPPPPP :( my 3200AP

HELPPPPP :(

I just tried flash 3200 with "v2_180.tfp" and using "FTP Programmer for AP39". Flash seems success , BUT now my 3200 always restart and restart and restart and restart....... :(

What have I done ?? How to recover my 3200 ?

Please help me.

[ruzalit]

http://www.lan23.ru/forum/showthread.php?t=1363

[Bervzux]

http://www.lan23.ru/forum/showthread.php?t=1363

Anyone have english version for how to unbrick 3200 ?

Thanks

[VBM]

http://translate.google.com/translat...php%3Ft%3D1363

google.com Translat... Or is it a horrible option?

[J.Forfun]

What have I done ??

Not you but your bootloader put something to wrong place. To my mind [Error] New Watch Dog Timer v2.0 can't load old code" meant that WDT of your mother firmware did not find Clear WDT command code.

How to recover my 3200 ?

First try to return things back by COM interface, it's easy and must work.
If you are not lucky use JTAG then.

Really Google make miracles. Just push right buttons :)
http://xoomer.virgilio.it/ramponis/
www.itanet.fvg.it/.../Guida%20ai%20segreti%20del%20DWL-2100AP(Rev%201.03).pdf
http://infarct.nm.ru/ap2100-repair.htm

[Bervzux]

Thanks All. I already sucess recover my 3200. Now please tell me (step by step) how can I upgrade/flash my 3200 with Bluebox ?

I need Bluebox in 3200 because I need to use non-standard channel.

Thanks in advance.

Not you but your bootloader put something to wrong place. To my mind [Error] New Watch Dog Timer v2.0 can't load old code" meant that WDT of your mother firmware did not find Clear WDT command code.

First try to return things back by COM interface, it's easy and must work.
If you are not lucky use JTAG then.

Really Google make miracles. Just push right buttons :)
http://xoomer.virgilio.it/ramponis/
www.itanet.fvg.it/.../Guida%20ai%20segreti%20del%20DWL-2100AP(Rev%201.03).pdf
http://infarct.nm.ru/ap2100-repair.htm

[Bervzux]

No one can help me ? Please, is there BB for 3200AP ?

Thank You

[J.Forfun]

BB firmware for 3200 doesn't exist, it was a commercial project for 2100 hardware only.
3200 and 2100 are very similar but it depends of the hardware release.
If I were you I first try uploading 2100 firmware to yr 3200 (this step will change bootloader), if success, BB then.
Good luck.